Industrial Agent

Product Price :Get Latest Price

Deinking Agent is an extremely powerful chemical compound, which is used for removing various inks, (black/colored) from cellulose fiber without damaging its chain structure. It also helps in preventing redeposition of ink on the cellulose fiber due to its emulsification power. Moreover, due to its ability to deink imported waste paper as well as local waste paper effectively, it is highly demanded among our clients. It is used in Paper Chemical Industry.

Specification:

• Appearance: Light yellow clear to opalescent liquid
• pH value : 10.0-11.5
• Total solids : 19± 1% w/w

Application:

• Recommended to add 0.2 to 1.0% on the weight of the pulp in the pulper for loosening the ink and separation from the pulp fibers
• Added in Hydrapulper or Breaker beater along with other chemicals like caustic soda, sodium Hypo chloride, sodium silicate, Hydrogen peroxide in required concentration
• Percentage of above chemicals depending upon the type of waste paper, type of loading ink characteristics.

Factors influencing deinking operation:

• Concentration: Concentration of the pulp in pulper should be up to 10% to 15%
• pH value: pH must be between 8.5 to11.0 of the slurry
• Temperature: The Temperature of the pulp can be minimum 55⁰C and maximum 60⁰ C
• Washing: Washing must be good and thorough.

Storage and Handling:

• Stable under normal conditions
• Non toxic

Additional Information:

Product Price :Get Latest Price

Formulated using quality ingredients, we provide Paper Coating Chemical, which is also called Gloss Agent. It is used for surface coating, waterproofing of paper & board articles and others, this agent is non-ionic and stable to alkali. This coating chemical reduces 25% ink consumption and gives excellent print gloss.

Dilution:

• It can be easily diluted in cold water
• 5Kgs.of this chemical may be diluted with 5Kgs. of water i.e. 10 liter of solution will be 150 GPL – strength
• This concentration can be varied to suit mills convenience
• Solution should be passed through a 40 mesh wire cloth while adding

Specification:

• Total Solid at 105⁰ C :30 ± 1%
• pH value: 7 ± 1
• Shelf life: 90 days
• Appearance: White liquid

Application:

• Being Non-ionic and stable to alkali, it is perfectly compatible with coating mixtures based on casein in and / or Synthetic latices such as Butakens
• Imparts luster and slight water resistance to coatings
• Should be added after addition of pigment along with the coating solution
• Dosage depends on quality of paper
• Normally its consumption is 5% on pigment (for Duplex Board) and 2% on pigment (for quality coated paper) or depends on the required Gloss, SOA (Surface Oil Absorption) & smoothness of paper
• It also increases whiteness & improve printability of paper & board

Storage & Handling:

• Storage must be in covered place & avoid direct sunlight
• Non toxic

Additional Information:

Product Price :Get Latest Price

Product Price :Get Latest Price

Anti Dust Agent (VERSHINE) is a specialty chemical, which is used in paper industry. It helps in reducing the tackiness and plucking on the M. G. cylinder.

Dilution:

• It may be easily diluted in cold water
• Before its addition, it is advisable to prepare a 20% concentrate solution in water
• Addition must be in four parts and water should be added in to chemical
• Solution should be passed through a 40 mesh wire cloth while adding

Specification:

• Appearance: Cream colored pourable paste
• pH value: 7±1
• Dilutability: Dilutable with water in any proportion
• Shelf life : 180 days

Application:

• To the stock suspension brings a better dispersion of the fibre
• This promotes a more uniform sheet formation
• It is absorbed by the fibres and gives a soft bulky handle and smoothness to the paper and the machine speed can be increased
• Because of the antistatic effect, processing difficulties can be reduced
• Can be added to the machine chest or before the head box where through mixing with the stock suspension is ensured
• It should be added after addition of optical brightener, dyes, dyefixing agents
• Dosage depends on the effect required and on the quality of the pulp
• Normally the dosage should be 0.2% to 0.8% on dry paper basis

Storage and Handling:

• Stable under normal conditions

Additional Information: